Products

  • Product Name：Automatic Transfer Switch

    Model： ATS
    Introduce：TIEON ATS(Automatic Transfer Switch) adopt see-saw structure which throughly avoid collision occurred in dual-power system. The system has mechanical-electrical locking function. The electric operation device work under lockout mode. Thus the manual operation is much more safer. The ATS is hermeticly made by special moisture resistant material so that the contactor would not oxidized and no leakage of arc.
Description：

WN-TYPE AC660V 40~3200A

1 apply to large load

2 three position ATS to avoid larger loads from shocking

3 excellent break capability

4 available for any situation which needs double power transfer switch

5 used in AC&DC

 

ATS technical features:

1, Withstand 20le current and above, contacts part with high pressure are difficultly detached and weld. It is special important for fire system.

2, Overlapping current: clearance and creepage distance of PC’s ATSE is 180% of breaker’s.

3, Fast transfer: apply of quickly making breaking technique, the on-off action of contact part is unrelated to operation .It can reduce influence between arc and contact and then improve ATS life expectancy the effectiveness of technique is more apparently developed when the load is motors or transformer. Transfer time is within 200ms=1/10 of CB’s.

4, Long contact expectancy: mechanical 5000 times, electrical 10000 times.

5, Eliminate momentary loss of power during transfer, inductive parts only be on power during transferring, contact remain mechanical connection after action. Apply for

6, AC&DC: adopt for rectifier current to control electrical powe.

7, Excellent anti-arc capability: multi-pieces anti-arc contact, quick shut off at the first time, and then remove dissociation gas, even below 120  dropout phase. It doesn’t make short circuit through second arc.

8, Highly safety: Under 61Ln/1.05Ue, the make-break action of ATS is 15 times.

9 Apply of contact point system.

 

Produce standard

1 Produce standard

 JEM 1038      UL 1008                    KSC 4504      KSC 0703

2 Standard for implement

(1) International standard

 IEC60947-6-1: 1998(VERSION 1.2)

(2)    National standard

GB/T 14048.11-2002

Using condition:

1)      altitude: below 2000m:

2)      temperature: -5C~+40C (average 35C)

3)      relative humidity: below 95%

4)      No exposure situation, no invasion condition with snowy or rainy, prevent from vapor, stream, smoking, dust, any dissolvable erosion substance

5)      AC 50Hz, 660V and below, DC up to 125V

6)      Avoiding from concussion and vibration.